Bookbinding glue applicators
Manual applicators, “brush” + container
The dispenser reduces the evaporation of solvents and drying of the brush, as well as improves the process of application. This produces tangible benefits – saving glue (varnish, paint) and working more efficiently.
There are containers of several capacities: 0.4 l; 0.9 l; 1. 5 l; 3l
1. How to fill the dispenser – Set the dispenser in the filling position. Pour the substance through a special hole.
2. When using the dispenser, close it using a special cap, leaving the brush inside.
3. If the adhesive thickens as a result of prolonged opening of the container, remove the cap and place the container in the filling position. After a short time, set the container back in the working position. Glue will have the liquid form. When the dispenser is not used, keep it in the filling position.
4. When using evaporating or inflammatory substances, keep the dispenser away from fire, lights or the sun.
When the dispenser is not used, keep it hermetically sealed.
Metal applicator with a spongy roller
Glue applicator, with a spongy roller, width 70 mm without a basis
There are different widths: 45 mm; 70 mm; 120 mm; 150 mm; 180 mm
Applicators with containers
Stainless steel container, water container (for immersing nozzles during breaks at work), 4 m hose, gun, tip nozzle.
Pour the glue into the container. Close the cover, bring compressed air (2-5 bar). Fix a properly selected adhesive nozzle. On the gun, adjust the amount of adhesive – the device is ready for operation.
precise dosing of glue,
application of the exact amount which you need,
The device is immediately ready for use,
one pumping is enough to empty the entire container – does not require continuous supply of compressed air
During breaks, immerse the nozzle in an external tank with water – after the break we are back to work.
Wide range of standard glue nozzles. We manufacture nozzles for individual needs, according to a model or drawing.